 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AZ767 SPDT SUBMINIATURE POWER RELAY FEATURES * * * * * * Small footprint Low cost Class B insulation standard Epoxy sealed version available 10 Amp switching UL, CUR file E44211 GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Minimum operations 1 x 107 1 x 105 at 5 A 240 VAC Res. 8 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) CONTACTS Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 150 W (SPST-NO) standard 1250 VA (SPST-NO) standard 90 W (SPST-NO) sensitive 750 VA (SPST-NO) sensitive 90 W (SPDT) 750 W (SPDT) Max. switched current: 10 A AC SPST-NO standard 5 A DC SPST-NO standard 3 A AC/DC SPST-NO sensitive 3 A AC/DC SPDT Max. switched voltage: 150* VDC or 380 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Release Time (typical) Dielectric Strength 2500 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight 1000 megohms min. at 20C 500 VDC 50% RH Greater than 5% of nominal coil voltage At nominal coil voltage -40C (-40F) to 90C (194F), standard -40C (-40F) to 105C (221F), sensitive -40C (-40F) to 130C (266F) 0.062" DA at 10-50 Hz 10 g operating, 100 g damage P.B.T. polyester Tinned copper alloy, P. C. 270C (518F) 5 seconds 80C (176F) 30 seconds 6 grams Rated Load UL, CUR Form A 10 A at 125 VAC, Res., 30k cycles [1] 10 A at 125 VAC, General Use., 100k cycles [2] 5 A at 250 VAC, General Use, 100k [1][2] 5 A at 30 VDC, Res., 100k cycles [1][2] 300 W at 120 VAC Tungsten [2] 3 A at 250 VAC, General Use, 100k cycles [1][2] sensitive 3 A at 30 VDC, Res., 100k cycles [1][2] - sensitive 5 A at 125 VAC, Res., 100k cycles [1] - sensitive 10 LRA / 1.5 FLA at 120 VAC, 100k cycles [1] 1/10 HP at 125 VAC, 100k cycles [1] 1/16 HP at 250 VAC, 100k cycles [1] 8 A at 250 VAC, General Use, 100k cycles [2] - sensitive high capacity Form C 3 A at 250 VAC, General Use, 100k cycles [1][2] 3 A at 30 VDC, Res., 100k cycles [1][2] [1] silver cadmium oxide [2] silver nickel Silver cadmium oxide or silver nickel <100 milliohms initially (24 V, 1 A voltage drop method) COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 253 mW standard 113 mW sensitive 1.25 W at 20C (68F) ambient 41C (74F) at nominal coil voltage, standard 22C (40F) at nominal coil voltage, sensitive Max. 130C (266F) Material Resistance NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice. 9/6/06 W AZ767 RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 3 5 6 9 12 18 24 48 Must Operate VDC 2.25 3.75 4.5 6.75 9.0 13.5 18.0 36.0 Max. Continuous VDC 5.0 8.3 10.0 15.0 20.0 30.0 40.0 80.0 Coil Resistance 10% 20 55 80 180 320 720 1,280 5,120 ORDER NUMBER* Form A (SPST) AZ767-1A-3D AZ767-1A-5D AZ767-1A-6D AZ767-1A-9D AZ767-1A-12D AZ767-1A-18D AZ767-1A-24D AZ767-1A-48D Form C (SPDT) AZ767-1C-3D AZ767-1C-5D AZ767-1C-6D AZ767-1C-9D AZ767-1C-12D AZ767-1C-18D AZ767-1C-24D AZ767-1C-48D *For silver nickel contacts change "-1A" to "-1AB" or "-1C" to "-1CB". Add suffix "E" for epoxy sealed version. Add suffix "A" for gold plated version. SENSITIVE RELAYS COIL SPECIFICATIONS Nominal Coil VDC 3 5 6 9 12 18 24 Must Operate VDC 2.25 3.75 4.5 6.75 9.0 13.5 18.0 Max. Continuous VDC 7.5 12.5 15.0 22.4 30.0 44.7 59.2 Coil Resistance 10% 45 125 180 400 720 1600 2800 ORDER NUMBER* Form A (SPST) AZ767-1A-3DS AZ767-1A-5DS AZ767-1A-6DS AZ767-1A-9DS AZ767-1A-12DS AZ767-1A-18DS AZ767-1A-24DS *For silver nickel contacts change "-1A" to "-1AB". For high capacity silver nickel contacts change "-1A" to "-1ABT". Add suffix "E" for epoxy sealed version. Add suffix "A" for gold plated version. MECHANICAL DATA PC BOARD LAYOUT .073 [1.85] .059 [1.50] .100 [2.54] .417 MAX. [10.59] .058 [1.49] .300 [7.62] .740 MAX. [18.80] 5xo.052 - FORM C 4xo.052 - FORM A [o1.3] .441 [11.20] FORM C ONLY VIEWED TOWARD TERMINALS WIRING DIAGRAM .614 MAX. [15.59] 5 4 .147 [3.73] .073 [1.85] 1 2 3 FORM C ONLY VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: .010" 9/6/06 W |
Price & Availability of AZ767-1A-12D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |